Cable Management for Your Home Studio

Cable Management For Your Home Studio

Messy or unorganized studios can have an effect on your productivity too.

We’re sure this has happened to you before. You find a source of inspiration and have an amazing idea in your head, but as soon as you walk into the studio, it’s gone!

You may even avoid your studio because it doesn’t feel ‘right’ enough.

If you feel this way, trust us, you’re not alone! Having an unorganized studio can make your mind chaotic too. The issues can only be solved by cleaning up your studio space!

An organized, clean studio can even have a positive psychological impact on you. It helps you feel clearer in your thought process and promotes creative thinking.

Often, it’s easy to point out what makes a studio so messy; it’s the dreaded cables! There are just so many cables and wires all bent on tangling up with each other that it can make the entire room seem disorganized.

There are a few solutions that you can keep in mind if you want the best cable management in your studio space. Here are a few handy ways to manage your studio space so that it looks clean and organized all the time.

Just a disclaimer; this won’t be enough to thoroughly clean your studio, but it’ll at least put you on the right track. Once the cables are out of the way, you’ll get a cleaner space with fewer tripping hazards.

How to Mark Your Cables?

The first thing you should do is think about marking the wires. Cable management will only be possible if you know exactly which cable leads where without having to waste time tracing it to the source.

Here are a few ways to apply this cable management technique.

Color-Coded Tape

There are plenty of different color-coded tapes that you can use to divide the cables in your home. Mark all audio, electric, instruments, etc. cables with different colors so that you know which is which.

Binder Clips

You need to put a small label on the binder clips and secure them to the side of your work table or desk. Simply loop the corresponding cable through the prong of the clip.

This will ensure that every cable in the home studio is retrievable and easily identifiable.

Buy Cord Identifiers

There are plenty of stores that sell colorful cable management identifiers. They have pre-made labels and are highly customizable.

Using cord identifiers also has the added benefit of making the cables in your studio look nicer.

Sharpie

You can also use a sharpie to mark which device or system every cable belongs to. Just wrap a piece of tape on it and scribble a marking on it with a sharpie.

Sticker Labels

You will be able to find sticker labels pretty easily in any store. Take the far left side and secure it to the cables and then fold it in half.

You can mark it however you like so that you can recognize the cable from afar.

Printed Labels

You can also print out labels and stick them directly onto the cables. Such cable management will give you the freedom to design your own labels and works perfectly with any plugs or sizes.

Ziploc Ties

Ziploc ties are the inexpensive organizing tools that you can use to great effect. We can use them to group any cables so that they are all in one place.

Then, you can label the entire group. You can color the ends of the ties with sharpies to make sure that you know which group of cables belongs leads where.

How to Buy Correct Cable Length for Your Studio Equipment?

The thing about professional studios is that you will never see exposed cables anywhere. The main reason for this is that professionals often solder and cut their own cables.

This ensures that they are able to tailor every wire according to the height and length they need. This ensures that no stray wires are strewn anywhere.

However, in a home studio, you may spot long 25 feet cables for a connection that only needed 3 feet. This may require you to solder the wire yourself.

Here’s the good news – it’s not as challenging as people may think. All you need is some practice and a few basic tools for the job.

How to Protect Your Cables?

How To Protect Your Cables?

Everybody knows the annoyance of replacing cables that may have gotten frayed or worn out.

Cables can suffer from wear and tear over time and can even be damaged by animals, children, kicking or tripping over the wires, and entanglement with other wires.

There are some measures you can take to ensure that you don’t have to keep buying new cables to replace the old ones.

You can use the following protection tips to make sure that all the cords in your home studio are well organized. However, make sure the tips below are used only on low voltage cords.

Any large cords, such as extension cables that have a bit of damage, should be thrown out to prevent fires or accidental shocks. Before getting started, make sure to unplug all the cables that you’re going to be working with.

Tubing Armor Cords

A lot of pets tend to chew on the cables if they are loose or hanging around. The best way to protect the cords is to buy a roll of vinyl tubing.

You can make a slit down the side of the clear tubing and cover the vulnerable cords with it.

Spiral Wrapped Cords

Cutting the vinyl tubing can be a lot of work, which is why we have an easier solution. You can purchase some spiral wrap to cover your cords.

This will shield them from any damage. You can even wrap multiple cables together so that they don’t stray away from each other and just create a mess of shielded cables.

Encasing Cords with Heat Shrinking

ENCASING CORDS WITH HEAT SHRINKING

Tubing can be shrunk with heat. You can use this method to safely protect your cords and wires from damage. You should use this method in cases where the cord’s casing is starting to lose connection.

You should carefully cut the shrink wrap into two pieces, and each piece should be around 1.25 inches in length. Where the cables are meeting the connectors, you need to add a small silicon adhesive.

You will need to slip the tubing on the cable before the silicone begins to dry. Both ends of the cables should be covered properly in the place where the cable meets the connectors.

Any excess silicone should be wiped properly before you begin to shrink the tubing with heat. Hold a lighter over the tubing, but make sure not to hold it too closely.

You want to cause the tubing to shrink, but you don’t want to melt the cable. You can even use a blow dryer at the warmest setting if using lighter seems dangerous to you.   

Use Pens to Prevent Fraying

Some cables, such as headphone jacks or charging cables, tend to fray more easily than others. In such cases, you should focus on cable management with an ink pen.

Remove the spring of the ink pen after taking it apart. Slowly stretch out the spring lightly before you wrap it around the cord’s base. You should be able to prevent frays with this level of protection since they won’t bend in awkward ways. 

Weld Cables with Plastic

Cable management for cords that have already sustained damage includes welding. In this case, the best product to use is Bondic. It is a welder-based plastic that can help you fix a cord in just a few seconds.

The main thing you have to do is to clean the cable first to ensure that there’s no dust or any other debris that can ruin the repair.

Then, you apply the Bondic on the frayed or broken area. The plastic needs to be cured under an LED light, after which it will harden. You will get the light in the repair kit too.

Using Electrical Tape

Electrical tape is a cheap and simple fix for most problems. You can simply wrap the frayed parts with the electrical tape.

The frayed area needs to be put into wraps first. You should also wrap outward along the cable to ensure that no further damage occurs.

Liquid Welding

There are many liquid electrical tapes that you can also use, such as PlastiDip.

These liquid plastics are an amazing solution for frayed or cracked cables. All you need to do is to apply around two coats of the paint and then let it dry for a few hours.

Conclusion

If you want a neat looking home studio, cable management should be your top priority.

There are a number of ways to prevent your cables from getting damaged or frayed, which you should definitely employ if you want your studio to look neat and clean.

Last updated on:

Leave a Comment

Your email address will not be published. Required fields are marked *